News

Aluminum is a light metal with a specific gravity of 2.7 g / cm³. Melting temperature of aluminum is 660 degrees Celsius. The thermal conductivity of aluminum is large (3 times greater than that of low carbon steel).

Nickel and nickel alloys are highly heat-resistant and have good corrosion resistance so that they are used in a variety of techniques: chemical industry, electrical engineering ...

Welding disabilities are the deviations in shape and size of the metal structure compared to design standards and technical requirements, which reduces their durability and productivity. Welding defects are formed during welding process

Slag is a nonmetallic component that exists in the weld, on the  surface or between layers. Slag inclusion is a type of welding defect that is easily visible in the weld. 

Welding capacity of medium and high carbon steels is low, this causes cracks at the end of the welding pool or in the...

Copper is a metal that is capable of heat conduction, electric conductivity and good corrosion resistance. The density...

TIG welding (Tungsten Inert Gas) is a method of arc welding in a protected gaseous atmosphere with a non-melting...

Aluminum and aluminum alloys can only weld effectively with the use of inert gas protection methods such as TIG...

Nowadays, MIG welding machines have gotten easier in use than ever in the past which led to enhancement in productivity and save much more time for welders. We would like to introduce you some tips below that is usually applied for troubles during the MIG welding time and solutions for them.

Gas Metal Arc Welding (GMAW) is considered MIG welding ( Metal Inert Gas welding) or MAG welding ( Manual Metal Arc...