WELDING MACHINE HK MIG 200I

• Control of the output parameter easily to improve arc performance with less spatter, and better bead appearance.
• Set up quicker, easier to change 2 different grooves – 0.8 mm and 1.0 mm of solid wire
• 20 – 200 A amps range, apply to at least 0.8 mm thickness of workpiece, 3 mm in a single pass and weld thicker materials easily with multiple passes.
• ​The arc control operates in MIG/MAG (GMAW) mode only and is used to adjust the intensity of the welding arc
• Protect the machine when the temperature is higher than allowed temperature
• Digital Amperage and Voltage display meters allow presetting of amperage and voltage value
• After arc stop, have the wire tip burned a little bit to avoid wire stuck in the workpiece
• Decrease spatter when arc starts
• Prevent water from coming into the receptacle

HONG KY Warranty:

• 1 year warranty for power source only